Cables

- 4 meter interconnection cable : Designed to connect DEYE micro inverters together. - Tips : Equipped with a Betteri BC01 male tip and a Betteri BC01 female tip. - IP67 waterproof standard : Ensures optimum protection against dust and water.

Read more less

NATIONAL STANDARDS NF C32-102-4 Use H07RN-F flexible industrial cables are particularly designed for the power supply of mobile machines, electrical tools, building sites. Use up to 0.6/1 kV is permitted in the case of protected fixed installations and for the power supply of motors of lifting devices and similar devices. These cables can be used in refrigeration installations. Laid Cable designed to operate in the open air. If it is buried, provide mechanical protection (gutter, channel, etc.) Dimensional characteristics Driver section: 4 mm² Number of drivers: 3 Max. outer diameter: 16.2 mm Minimum outer diameter: 12.7 mm Approximate mass: 290 kg/km Electrical characteristics Single-phase voltage drop: 10.1 V/A.km Admissible current in open air: 43 A Phase reactance at 50 Hz – cloverleaf installation: – Ohm/km Max. linear resistance of phase conductor core: 4.95 Ohm/km Rated operating voltage Uo/U (Um): 450 / 750 V Mechanical characteristics Mechanical resistance to shocks: Very good Cable flexibility: Flexible

Read more less

Flexible 2electric wire H07VK 1X6 GREEN/YELLOW Flexible, unsheathed, PVC insulated conductors for general use. The conductors H07V-K are particularly intended for wiring panels and cabinets. Use Nexans H07V-K conductors are particularly intended for the wiring of tables and cabinets. Laid Open air, on insulator, or under conduit: ducts, chutes, etc. For insulated conductors laid in a conduit in visible mounting or embedded in a wall for an ambient temperature of 30°C in the air in steady state. If the conditions are different, the correction factors of the NF C standard 15-100 or local country standard apply. Voltage drop Calculated with Cos phi = 0.8 Information and guides

Read more less

Nexans Ref.: 10056120 NATIONAL STANDARDS NF C32-102-4 Use H07RN-F flexible industrial cables are particularly designed for the power supply of mobile machines, electrical tools, building sites. Use up to 0.6/1 kV is permitted in the case of protected fixed installations and for the power supply of motors of lifting devices and similar devices. These cables can be used in refrigeration installations. Laid Cable designed to operate in the open air. If it is buried, provide mechanical protection (gutter, channel, etc.) Dimensional characteristics Driver section: 4 mm² Number of drivers: 3 Max. outer diameter: 16.2 mm Minimum outer diameter: 12.7 mm Approximate mass: 290 kg/km Electrical characteristics Single-phase voltage drop: 10.1 V/A.km Admissible current in open air: 43 A Phase reactance at 50 Hz – cloverleaf installation: – Ohm/km Max. linear resistance of phase conductor core: 4.95 Ohm/km Rated operating voltage Uo/U (Um): 450 / 750 V Mechanical characteristics Mechanical resistance to shocks: Very good Cable flexibility: Flexible

Read more less

- Product: DEYE Plug and Play Cable - Length: 3 meters - Section: 1.5 mm² - Usage: Connecting DEYE microinverter to a standard electrical outlet - Design: Plug and Play, for quick and easy installation - Manufacturer: DEYE - Quality: Guaranteed superior durability and reliability - Flexibility: 3 meter length for optimal layout - Adaptation: Ideal for residential and commercial solar systems - Advantages: Practical solution, easy to install, secure and efficient connection

Read more less

MC4 6mm² cable 1 meter 6mm² section for optimal transmission Designed for extensive and reliable connections in solar systems Generous 1 meter length for flexible connections Robust and resistant to harsh outdoor conditions Optimal energy transmission over longer distances Easy to install Compatible with most solar equipment Suitable for residential and commercial solar installations Ensures a durable and reliable connection within the solar system Strengthen your solar system with a high-quality connection solution

Read more less

Flexible 2electric wire H07VK 1X6 GREEN/YELLOW Flexible, unsheathed, PVC insulated conductors for general use. The conductors H07V-K are particularly intended for wiring panels and cabinets. Use Nexans H07V-K conductors are particularly intended for the wiring of tables and cabinets. Laid Open air, on insulator, or under conduit: ducts, chutes, etc. For insulated conductors laid in a conduit in visible mounting or embedded in a wall for an ambient temperature of 30°C in the air in steady state. If the conditions are different, the correction factors of the NF C standard 15-100 or local country standard apply. Voltage drop Calculated with Cos phi = 0.8

Read more less

Flexible 2electric wire H07VK 1X6 GREEN/YELLOW Flexible, unsheathed, PVC insulated conductors for general use. The conductors H07V-K are particularly intended for wiring panels and cabinets. Use Nexans H07V-K conductors are particularly intended for the wiring of tables and cabinets. Laid Open air, on insulator, or under conduit: ducts, chutes, etc. For insulated conductors laid in a conduit in visible mounting or embedded in a wall for an ambient temperature of 30°C in the air in steady state. If the conditions are different, the correction factors of the NF C standard 15-100 or local country standard apply. Voltage drop Calculated with Cos phi = 0.8 Information and guides

Read more less

Flexible 2electric wire H07VK 1X6 GREEN/YELLOW Flexible, unsheathed, PVC insulated conductors for general use. The conductors H07V-K are particularly intended for wiring panels and cabinets. Use Nexans H07V-K conductors are particularly intended for the wiring of tables and cabinets. Laid Open air, on insulator, or under conduit: ducts, chutes, etc. For insulated conductors laid in a conduit in visible mounting or embedded in a wall for an ambient temperature of 30°C in the air in steady state. If the conditions are different, the correction factors of the NF C standard 15-100 or local country standard apply. Voltage drop Calculated with Cos phi = 0.8 Information and guides

Read more less

Flexible 2electric wire H07VK 1X6 GREEN/YELLOW Flexible, unsheathed, PVC insulated conductors for general use. The conductors H07V-K are particularly intended for wiring panels and cabinets. Use Nexans H07V-K conductors are particularly intended for the wiring of tables and cabinets. Laid Open air, on insulator, or under conduit: ducts, chutes, etc. For insulated conductors laid in a conduit in visible mounting or embedded in a wall for an ambient temperature of 30°C in the air in steady state. If the conditions are different, the correction factors of the NF C standard 15-100 or local country standard apply. Voltage drop Calculated with Cos phi = 0.8 Information and guides

Read more less

Flexible 2electric wire H07VK 1X6 GREEN/YELLOW Flexible, unsheathed, PVC insulated conductors for general use. The conductors H07V-K are particularly intended for wiring panels and cabinets. Use Nexans H07V-K conductors are particularly intended for the wiring of tables and cabinets. Laid Open air, on insulator, or under conduit: ducts, chutes, etc. For insulated conductors laid in a conduit in visible mounting or embedded in a wall for an ambient temperature of 30°C in the air in steady state. If the conditions are different, the correction factors of the NF C standard 15-100 or local country standard apply. Voltage drop Calculated with Cos phi = 0.8 Information and guides

Read more less

NATIONAL STANDARDS NF C32-102-4 Use H07RN-F flexible industrial cables are particularly designed for the power supply of mobile machines, electrical tools, building sites. Use up to 0.6/1 kV is permitted in the case of protected fixed installations and for the power supply of motors of lifting devices and similar devices. These cables can be used in refrigeration installations. Laid Cable designed to operate in the open air. If it is buried, provide mechanical protection (gutter, channel, etc.). Dimensional characteristics Conductor section: 6 mm² Number of drivers: 3 Max. outer diameter: 18.0 mm Minimum outer diameter: 14.1 mm Approximate mass: 346 kg/km Electrical characteristics Single-phase voltage drop: 7.0 V/A.km Admissible current in open air: 56 A Phase reactance at 50 Hz – cloverleaf installation: – Ohm/km Max. linear resistance of phase conductor core: 3.3 Ohm/km Rated operating voltage Uo/U (Um): 450 / 750 V Mechanical characteristics Mechanical resistance to shocks: Very good Cable flexibility: Flexible

Read more less